Commercial Heat Exchanger Aluminum Anodes

Used for the protection of heat exchangers and underwater metals where space is a limiting factor.  Style A anodes are square, while Style B anodes are cast in a circular configuration.  Both styles have steel inserts cast integrally.  Inserts project out approximately 1/8" inch on each side and have a hole for mounting bolts and studs.  Specify either 1/2" or 3/8" diameter mounting hardware.

Part Number Variations: AH1B6, AZEP, AEP, AH2B2, AH2B2-1/2, AZEP-2, AZEP2, AEP-2, AEP-2B, AH2B3, AH2B3-1/2, AZEP-3, AZEP3, AEP-3, AEP-3B, AH2B4, AH2B4-1/2, AZEP-4, AZEP4, AEP-4, AEP-4B, AH2B5, AH2B5-1/2, AZEP-5, AZEP5, AEP-5, AEP-5B, AH2B6, AH2B6-1/2, AZEP-6, AZEP6, AEP-6, AEP-6B, AH2B9, AH2B9-1/2, AZEP-9, AZEP9, AEP-9, AEP-9B, AH2B11, AH2B11-1/2, AZEP-11, AZEP11, AEP-11, AEP-11B

Heat Exchanger

There are no products listed under this category.